I used this antenna for 15 years right up until the day I received a new Steppir Bigir with 80m kit.

These antennas now go for over $450

32 ft tall full quarter wave on 40m loaded 1 8 wave on 80.

Includes an un-opened Butternut Replacement Hardware Kit from DX Engineering. Replace all the old hardware with new when you re-assemble this antenna. See link below for the hardware kit.

If you want to disasemble it here we can apply new Jet-Lube SS-30 Pure Copper Anti-Seize to each joint.

The antenna is on the ground but still completely assembled in Clearwater Fl.

You can take it apart and move it yourself. If you want me to take it apart... well.... that will figure into the price.

These antennas are $453 Make an offer if you think my asking price is too high.